Table of Contents
Advertisement
Operations
IFC2-3030
IFC2-640
JNCA-2
IFC-320
IFI
RF DEV NO
RF DEV
ANSWER
Events History Messages
IFC2-3030
PR
PC
B
SLOT REALIGNMENT
(TEMP CHAN SET)
SLOT REALIGNMENT
RESTRUCTURING
(TEMP CHAN SET)
RESTRUCTURING
RESCUE MODE (TEMP
CHAN SET)
RESCUE MODE
TEMP CHANNEL SET
NORMAL CHANNEL SET
PROFILE DISTRIBUTION
DISABLED
PROFILE DISTRIBUTION
ENABLED
SWITCH ACCESS
ENABLED
SWITCH ACCESS
DISABLED
MAXIMUM DEVICE
COUNT EXCEEDED
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Type
Latching trouble;
A wireless device that was
remains active for
part of the mesh has
the first 180
dropped from the mesh.
seconds before it
The trouble is reported at
can be cleared
the FACP 180 seconds
with a system
after the device drops from
reset.
the mesh.
Table 2.1 Trouble Messages
A profile has been received, assigned by either SWIFT Tools or a distributor device.
A profile has been created.
The system is currently operating in the alternate channel set due to the presences of an interference
source such as a walkie-talkie.
Slot assignments are being re-assigned to avoid empty slots. The system is currently operating in the
alternate channel set due to the presences of an interference source such as a walkie-talkie.
Slot assignments are being re-assigned to avoid empty slots.
The gateway is performing a routine identification and assignment of optimal communication paths for
the mesh network. The system is currently operating in the alternate channel set due to the presences
of an interference source such as a walkie-talkie.
The gateway is performing a routine identification and assignment of optimal communication paths for
the mesh network.
A device has been removed or dropped from the mesh. The mesh network is currently scanning for
the return of the device or others with a matching profile. The system is currently operating in the
alternate channel set due to the presences of an interference source such as a walkie-talkie.
A device has been removed or dropped from the mesh. The mesh network is currently scanning for
the return of the device or others with a matching profile.
The system is currently operating in the alternate channel set due to the presence of an interference
source such as a walkie-talkie.
The system is normal.
The gateway has terminated the distribution of its profile.
The gateway has started the distribution of its profile.
The gateway is unlocked and the magnetic sensors on the front of the gateway are enabled.
The gateway is locked and the magnetic sensors on the front of the gateway are disabled. Attempts to
active the sensors will not be recognized.
More than 50 devices are attempting to join the mesh network. This is beyond the capacity of the
mesh network.
Table 2.2 Events History Messages
JFWSG FlashScan Wireless System Gateway
Description
Initiate a system reset at the FACP at least
3 minutes after the trouble was initiated to
clear.
If the device was intentionally removed, no
further action is needed.
If the device was not intentionally
removed, refer to panel history or active
panel troubles to investigate the cause of
the disturbance.
Description
Course of Action
31
Advertisement
Table of Contents
