Table of Contents
Advertisement
JFWSG FlashScan Wireless System Gateway
vide an extra layer of robustness and immunity from interference. A weak link trouble condition is
initiated for any device that does not have at least one connection at the primary threshold. This is
an optional setting that can be disabled to ignore the weak link trouble condition. The trouble can
be disabled at the gateway or at the FACP (IFC2-3030 or IFC2-640 with JNCA-2 only). Disabling
the trouble reporting at the panel will prevent the event from registering as a trouble but still enters
into history as a background event. Disabling the trouble reporting at the gateway prevents the
event from being reported to the FACP as a trouble or a non-trouble event. To enable trouble report-
ing, turn on the settings at both locations.
Disable Trouble Reporting at the Gateway Using SWIFT Tools
To disable trouble reporting at the gateway through SWIFT Tools:
1.
Connect the W-USB dongle device to your computer. For more information on the USB
dongle, refer to Section 4.
2.
Launch the SWIFT Tools application. Refer to Appendix A, "SWIFT Tools" for more
information.
3.
From the Home Screen, select the Diagnostics function.
4.
Select the desired gateway from the communicator panel.
5.
Click View Mesh.
6.
Click Advanced Functions. A drop-down list is displayed.
7.
Click Weak links troubles (On). The Report weak links troubles screen is displayed.
8.
Click Turn off reporting. The trouble reporting is now disabled.
Disabling Trouble Reporting at the Panel
To disable trouble reporting at the panel, refer to the IFC2-3030 or JNCA-2 Manual.
26
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Figure 2.18 Communicator Panel
Figure 2.19 Advanced Functions Options
Figure 2.20 Report Weak Links Troubles Option
Operations
Advertisement
Table of Contents
