Table of Contents
Advertisement
4.1 Introduction
The W-USB is a software interface that can be connected to a PC (running SWIFT Tools) through a
USB port. It communicates with the RF devices using the same frequencies as the mesh protocol.
This device is powered directly by the USB port.
The LED gives an indication of power and initialization status.
The W-USB has an adjustable USB connector to facilitate connection by reducing the size when
connected to a laptop/tablet.
4.2 Agency Approvals
4.2.1 FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-
ditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause
undesired operation.
FCC ID: PV3WFSADPT
WARNING: DO NOT MAKE CHANGES TO THE EQUIPMENT.
!
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Section 4: USB Adapter
Color
Red
Device has power but is not initialized or the driver is missing.
Yellow
Device is initialized and ready.
Blue
Device is updating or failed to load properly. Complete the update or re-
power the device. If problems persist, contact technical support.
Figure 4.1 USB Adapter
Description
43
Advertisement
Table of Contents
