Table of Contents
Advertisement
JFWSG FlashScan Wireless System Gateway
8.
Select the gateway from the Communicator Window on the right side of the Tools screen.
9.
Click Assign.
The gateway is now included in the list of devices with a profile assigned. The LEDs on the gate-
way will turn on green for 10 seconds after the profile has been received.
Remove a Profile
To remove a profile from a gateway using the SWIFT Tools application:
1.
Connect the W-USB dongle device to your laptop. For more information on the USB dongle,
refer to Section 4, "USB Adapter", on page 43.
2.
Launch SWIFT Tools. Refer to Appendix A, "SWIFT Tools" for more information on
launching the SWIFT Tools application.
3.
From the Home Screen, select the Site Survey, Create Mesh Network, or Diagnostics
function.
4.
Click Extras and select Set device to factory default.
5.
The Reset Devices screen appears, displaying the gateway and other devices that have a
profile assigned. Click to select the gateway and click Reset Device to remove the profile.
20
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Figure 2.9 Gateway Selection
Figure 2.10 Assign a Profile
Figure 2.11 Extras Menu
Configuration and Programming
Advertisement
Table of Contents
