3: Gateway Powered By The Slc - Johnson Controls SWIFT Instruction Manual

Smart wireless integrated fire technology
Table of Contents

Advertisement

Mounting and Wiring
2.7.3 Gateway Powered by the SLC
To power the gateway using the signaling line circuit, connect the gateway as described in the table
and graphic below:
Terminal
Pins
A5 and A7 SLC - (Common) & SLC Output +
A5 and A6 SLC - (Common) & SLC Input +
A4 and A5 Jumper selection to enable power from the SLC supply. (Insert Jumper when using SLC power.)
A3
A1 and A2 Jumper selection to enable power from the SLC supply. (Insert Jumper when using SLC power.)
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
A7 - SLC Out+/In+
A6 - SLC In+/Out +
A5 - SLC- (Common)
A4 - SLC Power Select 2
A3 - Power +24VDC
A2 - Power Ground
A1 - SLC Power Select 1
Figure 2.5 JFWSG Mounting Plate - Terminal Layout
Unused
JFWSG FlashScan Wireless System Gateway
Description
15

Advertisement

Table of Contents
loading

Table of Contents