Wireless Devices
Assigning a Profile Using SWIFT Tools
To assign a profile to the device using the SWIFT Tools application, do the following:
1.
Connect the W-USB dongle device to your computer. For more information on the USB
dongle, refer to Section 4.
2.
Launch the SWIFT Tools application. Refer to Appendix A, "SWIFT Tools" for more
information.
3.
From the Home Screen, select the Create Mesh Network function.
4.
Create a new profile or import an existing profile as required.
5.
Select and open the profile to be assigned to the gateway from the Name drop-down box in the
Profile section.
6.
Power on the device within approximately 20 feet of the laptop running SWIFT Tools.
7.
Ensure that the Scan On selection box is checked.
36
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Figure 3.2 Magnetic Sensor on a Module
Figure 3.3 Creating or Importing a Profile
Configuration and Programming
Magnetic
sensor