Table of Contents
Advertisement
Section 2: JFWSG FlashScan Wireless System
2.1 Description
The JFWSG is a device in a wireless fire system that acts as a bridge between fire alarm control
panels (FACPs) and wireless fire devices. All wireless fire devices communicate with the gateway
over the wireless network formed by the devices and the gateway.
The gateway is powered by either the SLC loop or by any external +24VDC UL listed power sup-
ply. The gateway uses the FlashScan protocol on the SLC to communicate with the panel and a pro-
prietary wireless protocol to communicate with wireless fire devices. The following graphic is an
illustration of the components of the SWIFT Network.
2.2 Agency Approvals
2.2.1 FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-
ditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause
undesired operation.
FCC ID: PV3WFSGW
WARNING: DO NOT MAKE CHANGES TO THE EQUIPMENT
!
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
10
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Gateway
FACP
SLC
wired SLC devices
Figure 2.1 SWIFT Network
wireless mesh
SWIFT
Tools
JFWSG
Gateway
network
USB adapter
Advertisement
Table of Contents
