Table of Contents
Advertisement
A.1 Description
SWIFT Tools is a standalone desktop Windows® application. It is a configuration and maintenance
tool for the gateway and devices of the SWIFT Network. Site surveys, device configurations, and
diagnostic functions are all part of SWIFT Tools. SWIFT Tools can be installed on a PC or a laptop
and communicates with the gateway and wireless devices through USB-based user interface. Con-
nect the W-USB adapter to the computer to invoke the SWIFT Tools application. At any point, only
one instance of SWIFT Tools can run on a laptop or PC.
SWIFT Tools has the following utilities:
Site Survey view
Creating Mesh Network
Diagnostic view
SWIFT Tools works in a wireless environment with the gateway and devices within a range of
approximately 20 feet.
SWIFT Tools is designed for systems running Microsoft Windows. Minimum system requirements
are listed below.
Component
Operating System
Hard Drive
RAM
Processor speed
A.2 Launching SWIFT Tools
To launch SWIFT Tools,
48
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Appendix A: SWIFT Tools
Windows XP Professional (SP3), Vista, Windows 7, and Windows 8 (32 bit and 64 bit)
20 GB hard drive space with minimum 1GB free space on hard disk.
Minimum 512MB RAM
1GHz minimum (2.4 GHz recommended) Processor, 512K Cache
Table A.1 System Requirements
1.Click Start, point to All Programs, click SWIFT Tool, and then SWIFT Tool.
The following screen is displayed. Alternatively, SWIFT Tools can be opened
through a shortcut located on the desktop. When installing the tools for JCI, an
option is given to also allow for the installation of Fire•Lite equipment with the same
Tools package.
Figure A.1 SWIFT Tools Start Screen
Minimum Requirement
Advertisement
Table of Contents
