Table of Contents
Advertisement
Operations
Lock/Unlock the Gateway at the FACP
The lock/unlock function for the gateway is accessible using the point programming menu. For
more information refer to the IFC2-3030 Manual. The lock/unlock function for the IFC2-640 with
JNCA-2 as primary display is accessible using the VeriFire® Tools programming utility. For more
information refer to the JNCA-2 Manual.
Lock/Unlock the Gateway Using SWIFT Tools
To lock/unlock the gateway:
1.
Connect the W-USB dongle device to your computer. For more information on USB dongle,
refer to Section 4.
2.
Launch the SWIFT Tools application. Refer to Appendix A, "SWIFT Tools" for more
information.
3.
From the Home Screen, select the Site Survey, Create Mesh Network, or Diagnostics
function.
4.
Click Extras. The following screen is displayed.
5.
Select Gateway Operations to lock/unlock the gateway. The Lock/Unlock gateway screen
appears, displaying the gateway that is locked.
6.
Select desired gateway and click Lock or Unlock as required.
• Lock - The Lock Gateway screen is displayed. Create a password and click Lock. The
gateway is locked.
• Unlock - The Enter password for Gateway screen is displayed. Enter the password and
click Unlock. The gateway is unlocked.
Password Reset
To reset the password, contact technical support.
2.9.4 Weak Link Trouble Reporting
The SWIFT Network uses two paths of communication for each device. To establish the link
between devices as a viable communication path, the signal strengths must meet the limits provided
in Section 2.3. The SWIFT Network implements a higher threshold for primary connections to pro-
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Figure 2.16 Extras Menu
Figure 2.17 Lock/Unlock Screen
JFWSG FlashScan Wireless System Gateway
25
Advertisement
Table of Contents
