2: Industry Canada; 3: Federal Institute Of Telecommunications; Specifications; 1: Electrical Specifications - Johnson Controls SWIFT Instruction Manual

Smart wireless integrated fire technology
Table of Contents

Advertisement

USB Adapter
4.2.2 Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1.
L'appareil ne doit pas produire de brouillage, et
2.
L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
IC: 12252A-WFSADPT
4.2.3 Federal Institute of Telecommunications
This device utilizes the Honeywell915 rev A radio module and complies with IFETEL standard(s).
IFT: RCPSYWU14-1829

4.3 Specifications

4.3.1 Electrical Specifications
Operating voltage: 4.3 VDC - 5.5 VDC (5VDC typical)
Supply current: 25 mA - 85 mA (33 mA typical)
4.3.2 Serial Communication Specification
USB standard 2.0
4.3.3 Mechanical Specifications
USB Connector type A
Length with connector closed: 3 in. (76.2 mm)
Length with connector open: 3.8 in. (96.2 mm)
Thickness on connector side: 0.5 in (13 mm)
Thickness on antenna side: 0.3 in. (8.4 mm)
Width: 1.2 in. (31.2 mm)
Weight: 0.7 oz. (19.5 g)
4.3.4 Environmental Specifications
Humidity: 10%RH - 93%RH, non-condensing
Maximum operating temperature: 32°F - 122°F (0°C - 50°C)
Storage temperature: 14°F - 140°F (-10°C - 60°C)
44
SWIFT™ Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000JC-E:C 5/8/2015
Specifications

Advertisement

Table of Contents
loading

Table of Contents