Default Ip Addresses For Windows And Simotion P Runtime; Communication Via An Ethernet Interface - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Parameter assignment/addressing
8.5 Ethernet communication
8.5.3

Default IP addresses for Windows and SIMOTION P Runtime

Default Ethernet addresses for use from Windows and SIMOTION P are preset.
Table 8-2
Ethernet interface
Onboard Ethernet 1
The default IP address for Windows can result in IP addresses being assigned twice, e.g.
during series commissioning (see Troubleshooting/FAQs (Page 135)).
If DHCP is set under Windows, the IP addresses for Windows are determined automatically.
8.5.4

Communication via an Ethernet interface

If both Windows and SIMOTION use the onboard Ethernet interface X1, the following
configuration is present:
Figure 8-10
Note
If no change of the default IP addresses is desired, all conditions with the default IP addresses
are fulfilled and no change is required.
86
Default Ethernet address for Windows and SIMOTION P Runtime
Distribution of the IP addresses for Windows and SIMOTION P Runtime
Windows
169.254.11.21
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION P Runtime
169.254.11.22
SIMOTION P320-4 E / P320-4 S