Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 71

Options Menu
Options
Reset to factory default
Note
Station Configurator settings
Settings made with the help of the Station Configurator are reset to the default values at the
time of delivery as well.
Further information
can be found in the section Defined states > Restore the factory settings using SIMOTION P
State (Page 108)
Info menu
Info
Hardware Version
Software Version
Info about SIMOTION P State
Note
The versions in the Info menu only become visible once SIMOTION P320-4 has been started.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Description
Restore the factory default.
This will delete the following data:
● Non-volatile SIMOTION data (retain data) in the SIMOTION
device
● The backup copy of non-volatile SIMOTION data on the external
CFast card (PMEMORY.XML/PMEMORY.BAK)
● User data in the area "volatile SIMOTION data" (RAM) and on the
external CFast card (ROM)
● The communication configuration (IP and DP parameters) on the
external CFast card is set to the factory settings.
The licenses on the CFast card are retained.
Description
Displays the hardware information.
Display of software versions.
Display of the SIMOTION P version.
Operator Control (hardware)
7.1 SIMOTION P state application
71