Mounting
4.4 Installing and removing CFast cards
4.4
Installing and removing CFast cards
SIMOTION P320-4 has an external slot for a CFast card on the interface side. Always use
SIMATIC IPC CFast cards for industrial applications.
NOTICE
Damage to the device
The CFast and CompactFlash connections are not compatible. The device is damaged.
Use the slot described in this section only for a CFast card.
NOTICE
Inserting the CFast card
SIMOTION P Runtime will only power up with the CFast card inserted.
Note
Note the version of the CFast card
Note the following:
● Always insert a CFast card Version 02 or higher.
● Always replace a CFast card with a card of the same or higher version.
● The production version can be found on the CFast card (see marking).
CFast card - ordering data
Designation
CFast
Note
Only use the CFast card specified with the article number above for the external interface.
Requirement
● The device is switched off.
● SIMATIC IPC CFast card, approved for industrial applications.
36
Article number
6ES7648-2BF10-0XG0
Commissioning and Hardware Installation Manual, 01/2015
Further information
4 GB
INDUSTRIAL GRADE
SIMOTION P320-4 E / P320-4 S