Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 40

Mounting
4.5 Installing the SIMOTION P320-4 in the control cabinet
The fasteners and screws required are supplied with the device for mounting depending on
the order number.
Requirement
● 1 standard mounting rail clip
● 2 screws
● 1 T20 screwdriver
Use the two screws to mount the standard mounting rail clip on the SIMOTION P320-4
enclosure.
Figure 4-1
40
Mounting the standard mounting rail clip
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015