Connection
5.5 Connecting PROFIBUS
Figure 5-5
3. Remove the slot plate on the left side to expose the cutout for the interfaces of the
IsoPROFIBUS board.
4. The IsoPROFIBUS board is inserted in the next step:
Slide the IsoPROFIBUS board on the left into the guide rail of the previously removed slot
plate and push it backward guided by the rail.
Figure 5-6
5. The IsoPROFIBUS board is inserted into the rear PCI slot by applying slight pressure.
52
SIMOTION P320-4 with changed position of the SYNC I/O connecting cable
Inserting the IsoPROFIBUS board
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015