Function Elements; Simotion P State - Menus - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

7.1.5

Function elements

Functions of the buttons
Below the current SIMOTION P320-4 status display, you will find a selection of buttons which
can only be operated with administrator rights.
Description of the button functions:
Table 7-2
Button
Restart
Restart (Del. SRAM)
Terminate SIMOTION P
Start SIMOTION P
Resetting to the delivery condition
SIMOTION P320-4 can be reset to the default settings at the time of delivery (Page 116) via
SIMOTION P State.
7.1.6

SIMOTION P State - menus

The menus of the SIMOTION P State application are described below:
● SIMOTION P
● Options
● Info
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Function of the buttons in SIMOTION P State
Function
Restarting SIMOTION P320-4. The information in the SRAM is retained.
If RamToRom is called beforehand, the project backup is restored.
Note
This is only possible if SIMOTION P320-4 has been powered up (status
not "0" to "5", "not started").
Restarts SIMOTION P320-4 and deletes the information in the SRAM.
If RamToRom is called beforehand, the project backup is restored.
Note
This is only possible if SIMOTION P320-4 has been powered up (status
not "0" to "5", "not started").
Stop SIMOTION P320-4.
Note
This is possible only if SIMOTION P320-4 has powered up.
Start SIMOTION P320-4.
Note
This is possible only if SIMOTION P320-4 has not been started
Operator Control (hardware)
7.1 SIMOTION P state application
69