Setting Up The Partitions Under Windows 7 Ultimate And Windows 10 - Siemens SIMATIC IPC427E Operating Instructions Manual

Device maintenance and repair
7.4 Installing the software
Partitioning of the HDD or SSD
In the delivery state, the following partitions are configured on the HDD or SSD drive with the
Windows Embedded Standard 7 operating system:
Table 7- 3
Partition
First
Second
To restore the partitions to their original delivery state, we recommend the software
SIMATIC IPC Image & Partition Creator. Additional information is available in the
accompanying documentation.
7.4.2.2

Setting up the partitions under Windows 7 Ultimate and Windows 10

You will need to reconfigure the partitions after installing a new drive, to repair corrupt
partitions or to change the partitioning.
Partitioning of the HDD or SSD
In the factory state, the following partitions are set up on the HDD or SSD for the
Windows 7 x64 UEFI operating system:
Partition
Primary
Second
Third
Fourth
In the factory state, the following partitions are set up on the HDD or SSD for the
Windows 10 UEFI operating system:
Partition
First
Second
Third
Fourth
Fifth
72
Size of the HDD/SSD
Name Partition size
< 100 GB
System 60 GB
Data Remainder
Name Partition size
SSD: > 60 GB
Boot
MSR
System 60 GB
Data
Name Partition size
SSD: > 60 GB
Boot
MSR
System 60 GB
WinRE
Data
> 100 GB
100 GB
Remainder
SSD/HDD: > 100 GB
260 MB
128 MB
100 GB
Remainder
SSD/HDD: > 100 GB
260 MB
128 MB
100 GB
500 MB
Remainder
Operating Instructions, 02/2021, A5E37454814-AE
File system
NTFS not compressed
NTFS not compressed
File system
FAT32
None
NTFS, not compressed
NTFS, not compressed
File system
FAT32
None
NTFS, not compressed
NTFS, not compressed
NTFS, not compressed
SIMATIC IPC427E