Hmi And Simotion Scout; Hmi And Simotion Scout Overview - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Drive systems (via PROFINET IO)
Table 2-2
Component
SINAMICS S120
Optional components
Table 2-3
Centralized I/O
IsoPROFIBUS board
UPS
Note
In addition, an IsoPROFIBUS board may be inserted for the PROFINET onboard.
2.3

HMI and SIMOTION SCOUT

2.3.1

HMI and SIMOTION SCOUT Overview

The operational sequences on the SIMOTION P320-4 are either monitored via the HMI system
(Human Machine Interface) or the SIMOTION SCOUT engineering system.
The HMI or ES software can be connected using the following variants:
● Local (Page 28)
● via PROFINET (Page 29)
● via Ethernet (Page 30)
● via IsoPROFIBUS (optional) (Page 31)
Local communication of the HMI/ES
Only one local connection to the local SIMOTION Runtime is possible. If HMI or ES is also
installed locally, PC internal can access other controllers/devices via PROFINET / PROFIBUS.
See section Local HMI or ES on SIMOTION P320-4 (Page 28)
Communication of the HMI / ES via PROFINET / Ethernet / PROFIBUS
By using one of these communication variants, you can control and monitor several
SIMOTION devices.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
List of typically connected drive systems
Function
Servo drives, innovative single-axis and multi-axis solution
Optional components
Function
PROFIBUS connection
Uninterruptible Power Supply
Description
2.3 HMI and SIMOTION SCOUT
27