Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 41

Standard rail mounting
Steps for mounting on standard rail
Proceed as follows:
1. First place the SIMOTION P320-4, which is equipped with rail clips, at an angle on the
upper rail guide.
2. Press the SIMOTION P320-4 slightly downward.
3. Swivel the SIMOTION P320-4 completely onto the rail until both clamps lock completely
into place.
Ensure that the locking into place of the SIMOTION P320-4 is audible.
Note
To ensure secure vertical mounting on standard rails, a standard rail ground terminal should
be mounted beneath the device.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
4.5 Installing the SIMOTION P320-4 in the control cabinet
Mounting
41