Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual page 38

Mounting
4.4 Installing and removing CFast cards
1. Release the lock of the cover. Push against the cover in the direction indicated.
Open the cover completely.
2. Insert the CFast card into the memory card slot as shown.
Push the CFast card into the memory card slot until it locks into place (ball-point pen
mechanism).
3. Close and lock the cover.
Removal
Remove the CFast card from the memory slot by pushing it in until it is ejected by about 5 mm
(ball-point pen mechanism).
38
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015