License Manager
Figure 8-5
Impact of hardware replacement on licensing:
The replacement of the SIMOTION P320‑4 means that the License Keys which were generated
for the previous SIMOTION P320‑4 must be regenerated and transferred to the new
SIMOTION device.
In this case, contact the hotline: http://support.automation.siemens.com
Note
You must restart the SIMOTION P320‑4 after licensing. To do this, in SIMOTION P State press
● either the Restart button
● or the "Terminate SIMOTION P" button and then Start SIMOTION P.
Note
For more information on licensing, see the SIMOTION SCOUT Configuration Manual.
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015
Dialog License Manager
Parameter assignment/addressing
8.3 SIMOTION P control manager
79