Interfaces And Operating Elements; Simotion P Runtime (Software) Structure - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Description
2.2 SIMOTION P320-4 product description
2.2.4

Interfaces and operating elements

SIMOTION P320-4
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
2.2.5

SIMOTION P Runtime (software) structure

SIMOTION P contains the SIMOTION P Kernel which performs the motion control and
interface control.
A SIMOTION P project is planned, configured, assigned parameters, commissioned, and
programmed by means of the SIMOTION SCOUT Engineering System (ES).
User data can be stored on the data media of the SIMOTION P320‑4.
Siemens WinCC flexible software can be used to visualize operational sequences or to operate
the machine. Third-party systems can be linked via the OPC interface.
24
On/off switch
24 V DC
Protective conductor
Memory card slot
4 × USB 3.0
Display port
DVI-I
Ethernet
COM1
3 × PROFINET
Position OFF is the delivery state.
The on/off switch does not isolate the device from the power sup‐
ply.
Power supply connection
Protective conductor terminal
Cover for the CFast card
USB 3.0 high current, backward compatible with USB 2.0/1.1
Display port connection for digital monitor
DVI connector for CRT or LCD monitor with DVI interface
RJ45 Ethernet connection for 10/100/1000 Mbps
Serial interface
PROFINET ports with three RJ45 sockets
Commissioning and Hardware Installation Manual, 01/2015
SIMOTION P320-4 E / P320-4 S