Overview Of Connections - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Connection

5.2 Overview of connections

5.2 Overview of connections
Below the SIMOTION P320-4 interfaces to which the I/O devices can be connected are shown.
Figure 5-1
The cabling for all elements and components of the complete system must only be carried out
when disconnected from the mains.
It does not matter in which order connection takes place.
The connection of the individual elements is described in the following sections:
● Connecting PROFINET (Page 47)
● Inserting IsoPROFIBUS (Page 50)
● Connecting Ethernet (Page 58)
46
System overview SIMOTION P320-4 (hardware)
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015