Current Operating Status - Siemens SIMOTION P320-4 E Commissioning And Hardware Installation Manual

Operator Control (hardware)
7.1 SIMOTION P state application
7.1.4

Current operating status

The current status of the SIMOTION P320-4 is displayed in the upper left area of the SIMOTION
P State application.
Table 7-1
Not started
0 ... 5
6 Running
Figure 7-3
The status LEDs and the current operating status are also displayed in the Windows task bar:
RUN status: Green
Note
FAQs can be found in the SIMOTION P320-4 E / P320-4 S Manual in the section
Troubleshooting/FAQs.
68
The following status displays are possible:
SIMOTION P320-4 is not started.
The progress of the SIMOTION P320-4 startup is displayed.
SIMOTION P320-4 has completed power up and the cyclic tasks are activated.
SIMOTION P state - status display
STOP status: Yellow NOT STARTED status: Gray
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 01/2015