Types Of Mounting - Festo EXCM-30 Instructions Manual

4 Mounting
4.2.3

Types of mounting

The product can be mounted in 2 ways: with profile mountings or with adjusting kits.
Profile mountings (Standard)
Profile mountings kits are only intended for mounting the product.
Note
Profile mountings are not adjustable.
• To align the product and maintain the limit values, some actions are required.
• Reordering adjusting kits (è www.festo.com/catalogue).
1
Socket head screw (in scope of delivery)
2
Clamp strip of profile mounting
3
Socket head screw (not in scope of delivery)
4
Profile mounting for clamp holder
Adjusting kit (accessory - not included in scope of delivery):
Adjusting kits are intended for mounting and
aligning the product. They compensate for height
differences in the mounting surface of up to
14 mm.
1
Clamp strip
2
Clamp holder
3
Flange and intermediate plate
4
Threaded pin
5
Clamping screw
Festo – EXCM-30-EN – 1605b – English
1
2
Fig. 4.1
5
4
Fig. 4.2
3
4
1
2
3
13