Applicable Documents; Obligations Of The Machine Manufacturer; Service - Festo EXCM-30 Instructions Manual

1 Requirements for product use
1.4

Applicable documents

Further information can be found in the support portal (è www.festo.com/sp).
1.5

Obligations of the machine manufacturer

The product is an incomplete machine. Commissioning of the product is prohibited until it has been
established that the machinery in which the product will be installed is in compliance with the provi­
sions of Machinery Directive 2006/42/EC.
Take the following into consideration for the destination:
– regulations and standards
– regulations of the testing organisations and insurers
– National specifications
1.6

Service

Please consult your regional Festo contact if you have any technical problems.
6 Festo – EXCM-30-EN – 1605b – English