Attachment Components - Festo EXCM-30 Instructions Manual

4 Mounting
1. Dismantling the motor (è Fig. 4.17 page 25).
2. Turn motor into the desired position.
Rotation by 180°
è Both motors can be rotated 180° inde­
pendently of each other and while main­
taining their mounting location.
Rotation by 90°
è By interchanging the motors, both can be
rotated 90° each.
3. Mount motor (è Fig. 4.17 page 25)
4.5

Attachment components

Note
• Observe the following when designing and mounting attachment components:
– Reduced freedom of movement through parts of the product
– Maximum screw-in depth on the slide of 5 mm
– Documentation of the attachment component
– Limits of the product (è A Technical appendix)
Attachment components are directly attached to
the slide of the Y-axis. Precise alignment is carried
out by means of centring holes 2 and threads 1.
1
M4 thread
2
Centring holes  5 H8
Dimensions [mm]
Size
EXCM-30
1) The tolerance refers to the fit 5H8.
Tab. 4.3
26
L1
1)
42 ±0.03
Fig. 4.19
L1
1
2
Fig. 4.20
B1
1)
26 ±0.03
Festo – EXCM-30-EN – 1605b – English
2
B1
1