Optional Work; Mounting/Dismantling Motor - Festo EXCM-30 Instructions Manual

4 Mounting
4.4

Optional work

4.4.1

Mounting/dismantling motor

Note
Third-party motors with a driving torque that is too high can damage the product.
• When using third-party motors observe the following:
– Maximum permissible driving torque (è www.festo.com/catalogue)
– Mounting dimensions of motor interface (è www.festo.com/catalogue)
– Suitable combination of coupling, coupling housing and motor flange
Fastening principle
8
7
6
2
3
4
5
1
Drill hole – clamping screw coupling access
2
Countersunk screw
3
Sleeve
4
Threaded pin
Fig. 4.16
If you ordered the planar surface gantry without motor, the motor attachment kit compris­
ing the entries 2, 3 and 4 (two each) is included.
The coupling is not part of the scope of delivery.
24
5
Motor
6
Coupling
7
Drive pinion
8
Drive cover
Festo – EXCM-30-EN – 1605b – English
1
2
3
4