A Technical Appendix; General Features; Flatness; Approvals - Festo EXCM-30 Instructions Manual

A Technical appendix
A Technical appendix
A.1

General features

Feature
Design
Motor type
Guide
Installation position
Type of mounting
Dynamic data
Feed constant
Paint-wetting impairment substances
1) Motors with brake must be used in the case of vertical installation (EXCM-30-...-SB-... ).
Tab. A.1
A.2

Flatness

Feature
Evenness
Tab. A.2
A.3

Approvals

Feature
Declaration of incorporation
(è www.festo.com/sp)
CE marking (see declaration of conformity)
(è www.festo.com/sp)
1) The device is intended for use in an industrial environment. Interference suppression measures may be required in residential
areas.
Tab. A.3
34
Planar surface gantry
Stepper motor
Recirculating ball bearing guide
1)
Any
Profile mounting
Observe catalogue specifications
è www.festo.com/catalogue.
[mm/rev] 38
Contains paint-wetting impairment substances
š 0.1
[mm/m²]
in accordance with Machinery Directive
2006/42/EC
in accordance with EU EMC Directive
Festo – EXCM-30-EN – 1605b – English
1)