Lubrication - Festo EXCM-30 Instructions Manual

7 Maintenance
7.3

Lubrication

The product is lubricated initially upon delivery. Subsequent lubrication is only required if
the guide elements have been degreased.
Use appropriate accessories from Festo (è www.festo.com/spareparts).
Lubrication points
Fig. 7.1
Lubricating point
Lubricant
Tab. 7.1
Caution
Crushing due to axis movements of the product.
• Slowly move or travel the Y-axis (traverse) and the slide of the Y-axis.
• Make sure that no one is located in the movement area during the axis movements.
Festo – EXCM-30-EN – 1605b – English
Bearing guide
Lubrication hole
LUB-KC1
Guide rail
Surface
31