Side Turn Signals - Seat Ateca 2018 Owner's Manual

3. Turn the connector lock
direction of arrow
connector.
4. Rotate the bulb holder in the direction of
arrow and extract it with the bulb.
2
5. Replace the defective bulb with a new
bulb with the same features.
6. Insert the bulb holder in the number
plate light and turn in the opposite direc-
tion of arrow until it stops.
2
7. Plug the connector into the bulb holder.
Note
Depending on how equipped the vehicle is,
the number plate lights may be LEDs. LEDs
have an estimated life that exceeds than
that of the car. If a light with LEDs fails, go
to an authorised workshop for replace-
ment.
102
›››
Fig. 119 in the

Side turn signals

and pull on the
1
Fig. 120
mirror
The side turn signals are LEDS and are inte-
grated in the exterior mirrors.
In case of failure, go to an authorised work-
shop to have them replaced.
Emergencies
Turn signal integrated in the rear view