Seat Ateca 2018 Owner's Manual page 288

The ACC is not currently availa-

ble. a)
With the vehicle stationary, switch off the engine and
start it up again. Check the SEAT badge area on the
›››
front Fig. 260 (in case it is dirty or icy or it has
been hit). If it is still unavailable, refer to a specialised
workshop to have the system inspected.
a)
The symbol on the instrument panels with colour
display is in colour.
 The ACC is active.
No vehicle is detected in front. The programmed
speed remains constant.
If the symbol is white: the ACC is

active.
A vehicle in front has been detected. The ACC ad-
justs speed and distance from the vehicle in front.
If the symbol is grey: ACC is inac-

tive (Standby)
The system is switched on, but is not adjusting.
 It lights up green
The ACC is active.
Some control and warning lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
286
Driving
WARNING
›››
Observe the safety warnings
trol and warning lamps on page
Display indications
On the instrument panel display: (A)
Fig. 259
ACC inactive (Standby). (B) ACC active.
Status display
›››
Indications on the display Fig.
Vehicle ahead detected. ACC is not ac-
1
tive and is not regulating your speed.
in Con-
Distance from the vehicle ahead. ACC is
2
124.
not active and is not regulating your dis-
tance.
Vehicle ahead detected. ACC is active
3
and is regulating your speed.
Distance level 2 set by the driver.
4
ACC is active and is regulating your dis-
5
tance based on speed.
Note
When the ACC is connected, the indica-
tions on the instrument panel screen may
be concealed by warnings from other func-
tions, such as an incoming call.
Radar sensor
On the front behind the SEAT badge:
Fig. 260
259:
radar sensor.