Change The Front Bulbs - Seat Ateca 2018 Owner's Manual

Change the front bulbs

Dipped beam headlight
In the engine compartment: remove
Fig. 108
the lid.
In the engine compartment: dipped
Fig. 109
beam lamp.
Follow the steps indicated:
1. Raise the bonnet.
98
Emergencies
›››
2. Move the loops Fig. 108
rection of the arrow and remove the cov-
er.
›››
3. Remove connector Fig. 109
the bulb.
›››
4. Unclip the retainer spring
pressing clockwise and inwards.
5. Extract the bulb and fit the replacement
so that the lug on the base fits into the
recess on the reflector.
6. Installation involves all of the above
steps in reverse sequence.
Main beam headlight bulb and turn
signal bulb
In the engine compartment: remove
Fig. 110
the lid.
in the di-
1
from
2
Fig. 109
3
In the engine compartment: main
Fig. 111
beam headlight bulb
.
3
Follow the steps indicated:
Main beam headlight bulb
1. Raise the bonnet.
2. Move the loop
tion of the arrow and remove the cover.
3. Slide connector
or right and pull.
4. Remove the bulb by disconnecting the
connector.
5. Installation involves all of the above
steps in reverse sequence.
and turn signal bulb
2
›››
Fig. 110 in the direc-
1
›››
Fig. 111 to the left
2