Mirror - Seat Ateca 2018 Owner's Manual

Rain sensor modified behaviour
Possible causes of faults and mistaken read-
ings on the sensitive surface
rain sensor include:
Damaged wipers: a film of water on the
●
damaged blades may lengthen the activa-
tion time, reduce the washing intervals or re-
sult in a fast and continuous wipe.
Insects: insects on the sensor may trigger
●
the windscreen wiper.
Salt on the road: in winter, salt spread on
●
the roads may cause an extra long wipe
when the windscreen is almost dry.
Dirt: dry dust, wax, coating on glass (Lotus
●
effect) or traces of detergent (car wash) may
reduce the effectiveness of the rain sensor or
make it react more slowly, later or not at all.
Windscreen crack: the impact of a stone
●
will trigger a single wipe cycle with the rain
sensor on. Next the rain sensor detects the re-
duction in the sensitive surface area and
adapts accordingly. The behaviour of the
sensor will vary with the size of the damage
caused by the stone.
WARNING
The rain sensor may not detect enough rain
to switch on the wipers.
If necessary, switch on the wipers man-
●
ually when water on the windscreen ob-
structs visibility.
160
Note
Clean the sensitive surface of the rain
●
›››
Fig. 157 of the
sensor regularly and check the blades for
›››
damage
To remove wax and coatings, we recom-
●
mend a window cleaner containing alco-
hol.

Mirror

Anti-dazzle rear view mirror
It is dangerous to drive if you cannot see
clearly through the rear window.
Rear view mirror with automatic anti-daz-
zle function*
The anti-dazzle function is activated every
time the ignition is switched on.
When the anti-dazzle function is enabled, the
interior rear vision mirror will darken auto-
matically according to the amount of light it
receives. The anti-dazzle function is cancel-
led if reverse gear is engaged.
WARNING
In the event that an automatic anti-dazzle
rear vision mirror breaks, an electrolyte flu-
id may leak. This could cause irritation to
the skin, eyes and respiratory organs. If you
Operation
Fig. 157 (arrow).
come into contact with this liquid, it must
be rinsed with large quantities of water. If
necessary, get medial help.
CAUTION
In the event that an automatic anti-dazzle
rear vision mirror breaks, an electrolyte flu-
id may leak. This liquid attacks plastic sur-
faces. Clean it with a wet sponge as soon
as possible.
Note
If the light incident in the interior rear vi-
●
sion mirror is obstructed (e.g. with the sun
blind*), the anti-dazzle rear vision mirror
with automatic setting will not operate per-
fectly.
When the interior lights are on or reverse
●
gear engaged, the mirrors do not darken
with automatic adjustment for anti-dazzle
position.