Seat Ateca 2018 Owner's Manual page 140

Table of Contents

Advertisement

Changing the battery
Unfold the vehicle key blade
Remove the cover from the back of the ve-
›››
hicle key
Fig. 141
in the direction of the ar-
›››
row
.
Extract the battery from the compartment
using a suitable thin object
Place the new battery in the compartment
›››
as shown
Fig.
142, pressing in the opposite
direction to that shown by the arrow
Fit the cover as shown
it onto the vehicle key casing in the opposite
direction to that shown by the arrow until it
clicks into place.
CAUTION
If the battery is not changed correctly,
the vehicle key may be damaged.
Use of unsuitable batteries may damage
the vehicle key. For this reason, always re-
place the dead battery with another of the
same voltage, size and specifications.
When fitting the battery, check that the
polarity is correct.
For the sake of the environment
Please dispose of your used batteries cor-
rectly and with respect for the environ-
ment.
138
Synchronising the vehicle key
›››
page
130.
If the
of the vehicle range, it is possible that the ve-
hicle can no longer be locked or unlocked us-
ing the key. In this case, the key must be re-
synchronised as described below:
›››
Fig.
142.
Unfold the vehicle key blade
If necessary, remove the cover from the
›››
driver door lever
.
›››
Press the
Fig.
141, pressing
this, it must remain with the vehicle.
Open the vehicle within one minute using
the key blade. The key has been synchron-
ised.
If necessary, fit the cap.
Operation
button is pressed frequently outside
›››
page
›››
page
16.
button on the vehicle key. For
Childproof lock
130.
Childproof lock on the left hand side
Fig. 143
door.
The childproof lock prevents the rear doors
from being opened from the inside. This sys-
tem prevents minors from opening a door ac-
cidentally while the vehicle is running.
This function is independent of the vehicle
electronic opening and locking systems. It
only affects rear doors. It can only be activa-
ted and deactivated manually, as described
below:
Activating the childproof lock
Unlock the vehicle and open the door in
which you wish to activate the childproof
lock.
With the door open, rotate the groove in the
door using the ignition key, clockwise for
the left hand side doors
ti-clockwise for the right hand side doors.
›››
Fig. 143
and an-

Advertisement

Table of Contents
loading

Table of Contents