Seat Ateca 2018 Owner's Manual page 103

Rear lights (in the rear lid)
Rear lid open: remove the lid.
Fig. 116
Remove the bulb holder.
Fig. 117
The rear lid must be open to change the
bulbs.
Follow the steps indicated:
1. Remove the rear lid cover in the direction
›››
indicated Fig. 116.
Fuses and bulbs
2. Unlock the securing tabs from the bulb
›››
holder Fig. 117 or turn the bulb
1
holder to the left and
2 3
3. Remove the bulb holder from its location.
4. Lightly press the defective bulb into the
bulb holder, then turn it to the left and re-
move it.
5. Fit the new bulb, pressing it into the bulb
holder and turn it to the right as far as it
will go.
6. Use a cloth to remove any fingerprints
from the glass part of the bulb.
7. Check that the new bulb works properly.
8. Carry out the same actions in reverse or-
der for assembly and pay special atten-
tion to placing the bulb holder, ensuring
that the tabs are properly secured.
Note
For LED pilots, you can only change the re-
verse bulb.
Changing number plate light bulbs
.
In the rear bumper: number plate
Fig. 118
light.
Number plate light: detach the bulb
Fig. 119
holder.
Follow the steps indicated:
1. Press the number plate light in the direc-
tion of the arrow
2. Remove the number plate light.
›››
Fig. 118.
»
101