Seat Ateca 2018 Owner's Manual page 94

Bear in mind the instructions for towing
›››
page 90.
Fitting the towline anchorage
Remove the towing eye from the vehicle
●
tool kit in the luggage compartment
›››
page 86.
Extract the lid for the towing eye using the
●
vehicle key blade (if you do not have the spe-
cific tool), pressing on the side and levering
gently from left to right.
Remove the lid and let it hang from the ve-
●
hicle.
Screw the towing eye in the housing by
●
turning it to the maximum anticlock-
›››
wise . Use a suitable object that can
completely and securely tighten the towing
eye in its housing.
After towing, unscrew the towing eye
●
clockwise with a suitable object.
Insert the side tab of the lid into the opening
●
of the bumper and press until the tab is prop-
erly clipped into the bumper.
Clean the towing eye if necessary and then
●
store it in the luggage compartment along
with the other vehicle tools.
CAUTION
The towing eye must always be completely
and firmly tightened. Otherwise, it could be
released while towing and tow-starting.
92
Emergencies
Fitting the rear towing eye
Rear bumper on right: remove the lid.
Fig. 103
Right side of the rear bumper: towline
Fig. 104
anchorage screwed in.
The housing of the screw towing eye is on the
right side of the rear bumper behind a lid
›››
Fig. 103. Vehicles equipped as standard
with a towing bracket do not have any hous-
ing for the screw towing eye behind the lid. In
this case, the tow hitch needs to be extracted
or installed and used for towing
››› ›››
page 330, .
Bear in mind the instructions for towing
›››
page 90.
Assemble the rear towing eye (cars with-
out a factory-equipped towing bracket)
Remove the towing eye from the vehicle
●
tool kit in the luggage compartment
›››
page 86.
Press the upper side of the lid
●
unclip it.
Remove the lid and let it hang from the ve-
●
hicle.
Screw the towing eye in the housing by
●
turning it to the maximum anticlockwise
››› ›››
Fig. 104 . Use a suitable object that
can completely and securely tighten the tow-
ing eye in its housing.
After towing, unscrew the towing eye
●
clockwise with a suitable object.
Insert the upper flange of the lid into the
●
opening of the bumper and press the lower
side of the lid until the upper flange is inserted
into the bumper.
Clean the towing eye if necessary and then
●
store it in the luggage compartment along
with the other vehicle tools.
›››
Fig. 103 to