Position of the bulbs
Pos.
Bulb function
⇒ f ig. 218
A
Reverse light
Fitting the bulb holder
The bulb holder is easy to fit.
– Check that the seal is seated correctly on the bulb holder.
– Position the bulb holder on the tail light and align it so that it is
securely seated.
– Press the bulb holder into the tail light until it engages.
– Fit the cover back in the interior trim so that it engages.
– Make sure that all bulbs for the tail lights are working.
Safety First
P21W LL
Operating Instructions
Side turn signals
– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed glass bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First place the turn signal in the opening in the bodywork, fixing
⇒ f ig.
the tabs
219, arrow
– Insert the bulb as shown by the arrow
Practical Tips
If and when
Fig. 219 Side turn signal
.
1
⇒ f ig.
219.
2
Technical Specifications
277