Side Turn Signal Bulbs; Number Plate Light - Seat IBIZA ST Owner's Manual

244 If and when

Side turn signal bulbs

– Press the turn signal to the left or to the right to remove the
bulb.
– Remove the bulb holder from the turn signal.
– Remove the failed bulb and replace with a new bulb.
– Insert the bulb holder in the turn signal guide until it clicks into
place.
– First fit the turn signal in the opening in the chassis, fastening
⇒ f ig.
the tabs 173, and then fit in the bulb as shown by the
1
⇒ f ig.
arrow 173.
2

Number plate light

Fig. 173 Side turn sig-
nals
– Insert the flat part of a screwdriver into the special slot and re-
move the number plate light from its moulding.
– Remove the connector and extract the bulb. After changing the
bulb, fit the connector again.
– Place the light in its moulding, pressing the left side. Once it is
fitted into place, press the right side until you hear a click.

Fig. 174 Remove the
number plate light.
