Seat Ateca 2018 Owner's Manual page 311

change between forward and reverse gears
(depending on the case). In successive ma-
noeuvres, the assistant tells the driver to
change gears, at the latest, when the contin-
uous audible signal is given (object present at
a distance of ≤30 cm) by Park Pilot.
When the Park Assist system turns the steer-
ing wheel with the vehicle stationary, the in-
strument panel also displays the symbol
Keep the brake pedal depressed while the
symbol remains on the dash panel display to
Selecting a parking mode
Driver assistance systems
turn the wheels with the vehicle stopped. This
way, the system will require fewer manoeu-
vres to complete the parking action.
Trailer mode
The Park Assist system cannot be switched
on if the factory-fitted towing bracket
›››
page 330 is electrically connected to a
trailer.
.

After changing a wheel
If, after changing a wheel, the vehicle stops
entering and exiting parking spaces correct-
ly, the circumference of the new wheel may
be different and the system may need to
adapt to it. The adaptation is automatic and
takes place during driving. Making turns slow-
ly and in both directions (20 km/h [12 mph])
for a few minutes may contribute to this
›››
adaptation process in Introduction on
page 307.
Overview of reduced displays for park-
Fig. 281
ing modes: Parallel parking in reverse.

pendicular parking in reverse. Perpendicular

parking forwards.
Per-

»
309