Gearbox Lever - Seat Ateca 2018 Owner's Manual

Reducing stored speed during CCS regula-
●
tion: press button in
2 
speed by 1 km/h (1 mph). Speed is reduced
until reaching the new stored speed.
Switching off the CCS: Move switch
●
›››
Fig. 53 to . The system is disconnec-
1 
ted and the memorised speed is deleted.
Operation using the third lever
Switching on the CCS: move the third lever
●
›››
to Fig. 54. The system switches on but it

does not control the speed as no speed has
been programmed.
Activating the CCS: press the button
●
›››
Fig. 54. It memorises and maintains the
current speed.
Temporarily switching off the CCS: move
●
›››
the lever to Fig. 54

press the brake pedal. The cruise control sys-
tem is switched off temporarily.
Reactivating the CCS: move the lever to
●
›››
Fig. 54 and release it. The memo-

rised speed is saved and controlled again.
Disconnect the CCS: turn the key to posi-
●
›››
tion Fig. 54. The system is disconnected

and the memorised speed is deleted.
›››

in Cruise control operation on
page 276

›››
page 275
42

Gearbox lever

to lower the
Manual gearbox

Gear shift pattern of a 5 or 6-speed
Fig. 55
manual gearbox.
The position of the gears is indicated on the
and release it or
gearbox lever
Press the clutch pedal and keep your foot
●
right down.
Move the gearbox lever to the required po-
●
sition.
Release the clutch.
●
Selecting reverse gear
Press the clutch pedal and keep your foot
●
right down.
With the gearbox lever in neutral, push it
●
downwards, move it to the left as far as it will
The essentials
›››
Fig. 55.
go and then forwards to select reverse
›››
Fig. 55 .
R
Release the clutch.
●

›››
in Changing gear on page 253

›››
page 253
Automatic transmission*
Automatic transmission: selector lever
Fig. 56
positions.
P Parking lock
R Reverse gear
N Neutral (idling)
D/S Drive (forward)
+/– Tiptronic mode: pull the lever forwards
(+) to go up a gear or backwards (–) to
go down a gear.