Seat Ateca 2018 Owner's Manual page 201

websites to confirm whether your phone
is compatible with the system.
Mirror Link
Check smartphone compatibility:
–
www.mirrorlink.com/phones
®
MirrorLink 1.1 or higher
–
Some of the Apps certified by SEAT or
–
the CCC must be installed in the de-
vice.
Android Auto
Check smartphone compatibility. An-
–
droid Auto™: www.android.com/auto/
Android 5.0 (Lollipop) or higher
–
Install Android Auto™ app
–
Apple CarPlay
Check smartphone compatibility. Apple
–
CarPlay™:www.apple.com/ios/carplay
iPhone 5 or higher and iOS 7.1 or higher
–
Turn on the SIRI personal assistant (see
–
phone settings)
USB cable connecting car to phone:
3
use the USB cable approved and sup-
plied by the phone's official distributor.
1)
Using the data connection to transfer the
smartphone apps to Full Link may involve addi-
tional charges. Please check the charges with
your operator.
Connectivity
Activation of Full Link
Full Link Setup
Fig. 199
Full Link menu
Fig. 200
Data connection via Wi-Fi or SIM is not
necessary to establish the connection be-
tween the smartphone and Full Link.
Data connection via Wi-Fi or SIM is neces-
sary to enable all of the app features
Proceed as follows to use Full Link:
Switch on the Infotainment system
●
Connect the smartphone to the vehicle's
●
›››
USB port using a USB cable page
In the main menu for the Full Link setup, se-
●
lect Activate data transfer for SEAT
›››
Fig. 199:
apps
Finally, a message will appear stating that
data transfer will commence when the device
is connected. Please note that data is trans-
ferred over connections between your vehi-
cle and mobile device. Press OK. Once selec-
ted, the technology compatible with your de-
vice can be used.
Note
Depending on your smartphone, it may
have to be unlocked for the connection to
occur.
1) .
239.
199