Seat Ateca 2018 Owner's Manual page 208

manually change the network key. The
network key must have a minimum of 8
characters and a maximum of 63.
SSID: WLAN Network name (maximum of 32
characters).
Do not send network name (SSID):
the checkbox to deactivate the visibility
of the wireless (WLAN) network.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the wire-
less device.
Repeat this process to connect other wireless
devices.
Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup can be used to create
a ciphered local wireless network quickly and
simply.
Establish the connection with the wireless
●
›››
network (WLAN) page
1) This function depends on the equipment and
the country in question.
2)
If the WLAN router does not support WPS the
network must be configured manually.
206
Press the WPS button on the WLAN router
●
until the warning light on the router starts
flashing.
OR: Press and hold the WLAN button on the
●
WLAN router until the WLAN light on the router
starts flashing.
Activate
Press the WPS button on the WLAN device.
●
The wireless (WLAN) connection is establish-
ed.
Repeat this process to connect other wireless
devices.
Setting up Internet access
The Infotainment System can use the WLAN
hotspot of an external wireless device to es-
1)
tablish an internet connection.
Establishing the connection with the wire-
less network (WLAN)
Activate and check the wireless hotspot on
●
the external device. If necessary, refer to the
216.
manufacturer's instruction manual.
Press the Infotainment
●
then press the
Infotainment System
button and

/ menu; OR
Settings System
2)
access the or
Media SEAT Media Control
mode and press the SETTINGS menu.
Press the WLAN menu and then enter Inter-
●
net access settings on your phone and acti-
vate the checkbox.
Press the Find function button and select
●
the wireless device you want from the list.
If necessary, enter the network key of the
●
wireless device in the Infotainment System
and confirm with OK.
Manual settings: To manually enter the net-
work settings of an external wireless
(WLAN) device.
The wireless (WLAN) connection is establish-
ed. To complete the connection, it may be
necessary to enter other data into the wire-
less device.
Note
Due to the large number of different wire-
less devices in existence, it is not possible
to guarantee fault-free operation of all
functions.