Seat Ateca 2018 Owner's Manual page 198

Additional information and display
options
The displays appearing on the screen may
vary depending on the settings, and may dif-
fer from those described here.
The status bar on the screen can display, for
example, the current time and outside tem-
perature.
All displays can be viewed only after com-
pletely restarting the Infotainment system.
Initial configuration wizard
Initial configuration wizard
Fig. 195
The initial configuration wizard will help you
to set up your Infotainment system the first
time you switch it on.
Every time you switch on the Infotainment
system, the initial setup screen will appear
196
Infotainment System
›››
Fig. 195 if any parameters have not been
set or if the NEVER function button has not
been pressed.
Function button: function
Closes the Configuration Wizard, and
the main menu or last mode in which
you used the Infotainment system will
CLOSE
appear. The next time you switch on
the system, the Configuration Wizard
will start up again.
Disables the possibility of changing
the settings of the Infotainment sys-
tem. If you want to perform the initial
NEVER
system setup, you must enter via Sys-
and select Configura-
tem setup
.
tion Wizard
Starts up the Configuration Wizard.
START
Press to configure the time and date (if
it has a navigation system it will be
A
configured automatically with the
GPS).
Press to search and store to memory
the radio stations that have the best
B
reception at that moment on all avail-
able bands (AM, FM and DAB).
Press to link your mobile telephone to
C
the Infotainment system.
Press to select your home address us-
a) ing your current position or by man-
D
ually entering an address.
Function button: function
To go to the previous or next parameter
to set.
When a parameter has been set, the
PREVIOUS
only way to reset it is from the main
menu, clicking on it, and not using the
NEXT
Previous/Next buttons.
When setting any parameter, a confir-
mation mark will appear on it
Once one or more settings have been
applied, click on this in the main menu
of the wizard to confirm and finalize
the settings.
FINISH
If there are any parameters you have
not set, the next time you connect the
Infotainment system, the Initial Config-
uration Wizard will start up.
a)
Only valid for Navi System and Navi System Plus.
.
