Luggage compartment shelf
In the boot: removing and installing
Fig. 170
the shelf.
In the boot: removing and installing
Fig. 171
the shelf.
The luggage compartment cover blocks the
view into the luggage compartment.
Transport and practical equipment
Removing
›››
Detach the cord loops
Fig. 170
●
their hooks
.
A
Remove the rear shelf from the side sup-
●
›››
ports
Fig. 171
by pulling it upwards and
then take it out.
If necessary, the rear shelf can be stored un-
der the luggage compartment double floor
›››
page
171.
Fitting
Insert the cover horizontally so that the "re-
●
cess" fits onto the axis of the supports
›››
Fig. 171
and press down until it engages.
›››
Hook the loops
Fig. 170
●
B
WARNING
The luggage compartment cover must
●
always be fixed properly (risk of accident).
The luggage compartment cover should
●
not be used as a storage shelf. Articles
placed on this cover could cause injury to
vehicle occupants in an accident or if the
brakes are applied suddenly.
Storing the rear shelf
from
B
In the boot: covers for storing the rear
Fig. 172
shelf.
to the rear lid.
In the boot: fitting the rear shelf.
Fig. 173
The rear shelf can be stored under the lug-
gage compartment variable floor.
Remove the left and right covers
●
Press the rear shelf until it engages in its
●
›››
housing
Fig.
›››
Fig.
172.
173.
»
171