Seat Ateca 2018 Owner's Manual page 101

Turn signal bulb
1. Raise the bonnet.
›››
2. Move the loop Fig. 110
tion of the arrow and remove the cover.
›››
3. Turn the bulb holder Fig. 111
clockwise and pull.
4. Remove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
5. Installation involves all of the above
steps in reverse sequence.
Front fog light bulb*
in the direc-
1
anti-
3
Fog light: remove the grille
Fig. 112
Fuses and bulbs
Fog light: detach the bulb holder
Fig. 113
Follow the steps indicated:
›››
1. Remove the screw Fig. 112
the fog light grille using a screwdriver
and extract the grille.
›››
2. Remove the 3 screws Fig. 112
3. Remove the metal clip situated on the
upper part of the fog light by pulling
away from the vehicle
3 
the fog light.
›››
4. Remove connector Fig. 113
the bulb.
›››
5. Turn the bulb holder Fig. 113
clockwise and pull.
6. Remove the bulb by pressing on the bulb
holder and turning it anticlockwise at the
same time.
7. Installation involves all of the above
steps in reverse sequence.
8. Check that the bulb works properly.
from
1 
.
2 
and extract
from
1
anti-
2
»
99