Rep 4.19 Planetary Assembly - Xerox Telecopier 7017 Technical Reference Manual

REP 4.19 Planetary Assembly

Parts List on PL 4.4
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove RH cover (REP 1.2).
4. Remove coupler cover (REP 1.3).
5. Remove LH cover (REP 1.4).
6. Remove recording paper.
7. Remove lower paper guide assembly (REP
4.5).
8. Remove printer motor cover (REP 4.6).
9. Remove pressure roller assembly (REP
4.11).
Telecopier 7017 / 7017SF
10. Remove cutter crank arm (REP 4.13).
11. Remove cutter belt.
12. Remove planetary assembly.
a. Remove the two screws and spacer
securing planet bracket.
b. Remove planet bracket.
c. Loosen printer belt at printer motor.
d. Remove planet gears and planet
pulley.
Replacement
CAUTION
The three planet gear #2 are easily dislodged.
Ensure that the three planet gear #2 are
properly seated before reinstalling.
1. Apply a very small amount of 70P87 to
the internal teeth
contacting surfaces of
assembly. (Figure 1)
NOTE: Ensure 70P87 is not on external
surfaces of the planetary assembly.
2. Ensure shoulders of the three planet gear
#2 are positioned towards the brass gear
(planet gear #1).
3. Reinstall in reverse order.
12/88
4-37
www.printcopy.info
and internal
the planetary
REP 4.19