Rep 4.15 Printer Motor - Xerox Telecopier 7017 Technical Reference Manual

REP 4.15 Printer Motor

Parts List on PL 4.4
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove RH cover (REP 1.2).
4. Remove coupler cover (REP 1.3).
5. Remove LH cover (REP 1.4).
6. Remove LH paper side plate (REP 1.11).
7. Remove recording paper.
8. Remove lower paper guide assembly (REP
4.5).
9. Remove printer motor cover (REP 4.6).
10. If installed, remove A8 store & forward
PWB (REP 5.4).
11. Remove A2 main PWB (REP 5.5).
12. Remove power supply assembly (REP 5.6).
13. Remove CNC PWB assembly (REP 5.10).
14. Remove printer motor. (Figure 1)
a. Remove the three screws securing the
printer motor.
b. Loosen printer belt at printer motor.
c. Remove printer motor harness from
twist tie.
d. Remove printer motor.
REP 4.15
12/88
4-34
www.printcopy.info
Replacement
NOTE: Replacement motors have both J104
and J115 marked on the connector.
motor connector should be marked as J115.
1. If printer motor was replaced, delete J104
on the connector.
2. Reinstall in reverse order.
Telecopier 7017 / 7017SF
Printer