Rep 4.4 Recording Paper Supply Indicator - Xerox Telecopier 7017 Technical Reference Manual

REP 4.4 Recording Paper Supply
Indicator
Parts List on PL 4.3
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove RH cover (REP 1.2).
4. If installed, remove A8 store & forward
PWB (REP 5.4).
5. Remove the recording paper.
6. Remove the recording
indicator.
a. Remove indicator spring from the RH
frame.
b. Press a small screwdriver through the
access holes in the base frame (Figure
1) to release the recording paper
supply
Telecopier 7017 / 7017SF
paper supply
indicator.
12/88
4-25
www.printcopy.info
Replacement
1. Reinstall the recording
indicator.
2. Reinstall the indicator spring.
3. Check for the following:
• The recording
indicator is positioned at rear of
RH frame cutout.
• Both ends of
recording paper supply indicator
are secured in the base frame.
• Indicator spring is positioned in
detent on the locating tab on the
RH frame.
4. Reinstall remaining components
reverse order.
paper supply
paper supply
shaft on the
in
REP 4.4