Disassembly and Reassembly
6-2-6 Guide Lower Assembly
1. Before you remove the Guide Lower Assem-
bly, you should remove:
- Rear Cover (see page 6-26)
- Scanner Assembly (see page 6-27)
- OPE Assembly (see page 6-29)
- ADF Upper Assembly (see page 6-31)
2. Remove the four screws securing the Guide
Lower Assembly. Then remove the fifth screw
from underneath, as shown below.
6-32
3. First push in the Guide Lower in the direction
of arrow 1. Unlatch the Guide Lower Assem-
bly as shown by arrow 2 and remove in the
direction of the arrows.
4. Pull the Input Tray in the direction of the arrow
and remove it.
3/03
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i